How DHCP relay agents work

How DHCP relay agents work


A relay agent relays DHCP/BOOTP messages that are broadcast on one of its connected physical interfaces, such as a network adapter, to other remote subnets to which it is connected by other physical interfaces. The following illustration shows how client C on Subnet 2 obtains a DHCP address lease from DHCP server 1 on Subnet 1.

1. DHCP client C broadcasts a DHCP/BOOTP discover message (DHCPDISCOVER) on Subnet 2, as a User Datagram Protocol (UDP) datagram using the well-known UDP server port of 67 (the port number reserved and shared for BOOTP and DHCP server communication).

2. The relay agent, in this case a DHCP/BOOTP relay-enabled router, examines the gateway IP address field in the DHCP/BOOTP message header. If the field has an IP address of 0.0.0.0, the agent fills it with the relay agent or router's IP address and forwards the message to the remote Subnet 1 where the DHCP server is located.

3. When DHCP server 1 on remote Subnet 1 receives the message, it examines the gateway IP address field for a DHCP scope that can be used by the DHCP server to supply an IP address lease.

4. If DHCP server 1 has multiple DHCP scopes, the address in the gateway IP address field (GIADDR) identifies the DHCP scope from which to offer an IP address lease.

For example, if the gateway IP address (GIADDR) field has an IP address of 10.0.0.2, the DHCP server checks its available set of address scopes for a scope range of addresses that matches the class A IP network that includes the gateway address as a host. In this case, the DHCP server would make a check for a scope of addresses between 10.0.0.1 and 10.0.0.254. If a matching scope exists, the DHCP server selects an available address from the matched scope to use in an IP address lease offer response to the client.

5. When DHCP server 1 receives the DHCPDISCOVER message, it processes and sends an IP address lease offer (DHCPOFFER) directly to the relay agent identified in the gateway IP address (GIADDR) field.

6. The router then relays the address lease offer (DHCPOFFER) to the DHCP client.

The client IP address is still unknown, so it has to be broadcast on the local subnet. Similarly, a DHCPREQUEST message is relayed from client to server, and a DHCPACK message is relayed from server to client, according to RFC 1542.